ensure subcommand exists, then include --help in its completion output

If subcommand is provided (and exists) and its first arg is -h/--help,
go ahead and intercept the call; redirecting to rbenv-help <subcommand>

This means subcommands and plugins need not handle --help flag
themselves

Without it, it falls back to `--version` being executed as a subcommand,
which works but isn't obvious

- Explicitly asking for help with `-h` or `--help` exits with 0 status
  and displays help on stdout.

- Not providing any arguments to rbenv results in failure status and
  displays version and help on stderr.

If `foo` didn't exist and `RBENV_VERSION=system rbenv which foo` was
called, the error message used to be misleading:

    rbenv: version `system' is not installed

Instead, have the error message simply say that the command was not found.

Fixes #770

The symlinks weren't correctly resolved if they were pointing to a
single path component, such as `ln -s foo bar`.

Useful in combination with `--bare` to list just the unique version
numbers without the extra directory entries that are symlinks to other
version numbers in the same directory.

BASH_SOURCE might be more reliable.

This is for Linux desktop platforms that have Terminal application
configured to start shells in interactive but not login mode. Creating a
`~/.bash_profile` would also cause `~/.profile` to not run, which might
be a problem on Ubuntu which ships with a default `~/.profile`.

When `rbenv --version` is called, this now happens:

1. It changes into the directory where `libexec/rbenv--version` resides
   and checks if it's a checkout of the rbenv repo (as opposed to
   Homebrew checkout or something else). Then it reads the git revision.

2. If that failed, change to `$RBENV_ROOT` directory and repeat step 1.

Closes #725

This is useful as an indicator where it is coming from.

It's not that this is a preferred way to set a global version (one
should use `rbenv global <version>` instead), but this fixes the
function purely for correctness: all parent directories should be
scanned, even the root directory.

Fixes #745

This can be done using bash directly.

When we started to support reading `.ruby-version` files, we made a
commitment to not support fuzzy version matching. Treating "ruby-2.1.5"
as "2.1.5" is a sort of fuzzy matching, so we put in place a warning
telling you to remove the extraneous "ruby-" prefix popularly used by
other Ruby version managers to denote MRI. (Their logic is that MRI is
"ruby" and other rubies are not "ruby", apparently.)

However, people are often not able to remove the prefix in their
projects because they want to support other coworkers and tools that
sadly still require the prefix, like RubyMine.

So to restore sanity for a big portion of our users, the warning is gone.

In the event that `eval "$(rbenv init -)"` is called from a function named
rbenv (which I do to get rbenv to load lazily in my shell), evaluating the
phrase `rbenv rehash` will cause the outer function to run again (causing an
infinite loop).

This change makes it clear you want the command named rbenv and not a function
which may exist in the environment.

This allows rbenv source code to ship with built-in hooks.

It doesn't need to be a bash array and we don't need a separate index of
shims registered. Simply keep everything in a space-separated string and
use that as an index as well.

This assumes that executable names *never* have spaces in them.

On my system that has 25 versions under rbenv, this speeds up rehash
almost 3-fold:

- before: 391 ms
- after:  134 ms

This is achieved by removing duplicate names of executables before
registering them as shims. Since most Rubies will share a lot of the
same executable names ("ruby", "rake", "bundle", ...), this is a
considerable reduction in number of shims registered.

Too many of our users have a shell initialization set up that
inadvertently duplicates some or most of the entries in their PATH,
bringing the system paths again in front of rbenv's shims. If this was a
nested shell (a typical scenario when starting up tmux), `rbenv init`
would get eval'd again but this time, shims won't get added to the front
of the PATH and would only stay and the end of the path, effectively
rendering them useless.

I tried to argue that this is a user problem rather than rbenv's, but I
can't fix everybody shell init when they report bugs. Instead, let's
revert to simpler times in rbenv where we just roll along with the
duplication and don't ask any questions.

This reverts commit 03fa148e81.

Fixes #369

Delegate to `rbenv-shims` instead of `rbenv shims` and therefore skip
going through the main `rbenv` executable again that would set up a lot
of the environment that was already set.

This implements removing of the shims path element via bash
substitution, instead of jumping around in all the `$PATH` elements.

Running any shim (and thus `rbenv-exec`) would always execute
`rbenv-version-name` twice: once in `rbenv-exec` and another time in
`rbenv-which`, even though RBENV_VERSION variable would have already
been populated at this point.

Now RBENV_VERSION is respected within `rbenv-which`.

It's slow and not necessary since we expect `$0` to already be expanded.

In tests this change forces us to deal with some relative paths, but
it's not a big deal. The `rbenv init -` output in the most common case
will be the same as before:

    source '/home/myuser/.rbenv/libexec/../completions/rbenv.bash'

This speeds up every `rbenv` invocation significantly.

On systems that support both C compiling and dynamic loading, we can
speed up `realpath()` (where most time in rbenv is spent) by replacing
it with a dynamically loaded bash builtin.

When `make -C src` is called in the project's root,
`libexec/rbenv-realpath.dylib` will be created. If it exists, rbenv will
attempt to load it as a builtin command. If it fails, execution will
fall back to the old `realpath()` shell function.

Allows for code to be added to the end of the script which will not
mysteriously fail to run for fish shell.

When created on Windows, .rbenv-version or .ruby-version files may have CR characters that will prevent rbenv from correctly parsing the Ruby version. Discard those characters when reading the file.

finding_local_version_file is extremely slow, when working directory is under the UNC path.
Because //host/.rbenv-version and //.rbenv-version do not exist, but testing them is so slow.
It's the reason to make a serious delay of the response, when the Ruby runs with a current working directory under the UNC path under Cygwin environment.

A response of before applying this patch.
//somehost/somedir $ time ruby -e "exit"

real    0m13.922s
user    0m0.168s
sys     0m0.287s

A response of after applying this patch.
//somehost/somedir $ time ruby -e "exit"

real    0m0.721s
user    0m0.153s
sys     0m0.319s

It seems that "comm" header can't be relied on cross-platform, but that
"ucomm" is more portable. I have no idea whether it's the right value to
use here, but it seems to be doing the job.

Also strip trailing whitespace because OpenBSD 5.4 `ps` output is padded
with spaces for some reason.

Fixes #489

The non-extended regex pattern didn't work on OpenBSD so this switches
grep to extended pattern mode that seems to work consistenty on all
systems.

Fish user config file `~/.config/fish/config.fish` loads for every
instance of fish shell, not just interactive ones. Since it's
unnecessary and dangerous to eval `rbenv init -` output in
non-interactive shells, wrap the invocation in a conditional that checks
if the current shell is interactive.

Fixes #501

It was supposed to fix shelling out to Ruby but it in fact broke another
kind of shelling out to Ruby: invoking the `ruby` binary directly with
the `-S` flag.

Fixes #480

This reverts commit db143bb654.

It doesn't exist as a builtin, and it doesn't seem there is a way to
detect support for a shell builtin that is portable. So, just detect
fish and don't the rehash command at all.

Fixes #478

Process substitution seems to be causing problems with some versions of
bash on specific systems.

Fixes #401

Avoids the case where shell detection would result in
`basename "-bash"` invocation, triggering the error:

    basename: illegal option -- b

fixes #462

`$SHELL` variable is a terrible way of detecting the current shell
because it's not even supposed to reflect the current shell; it's meant
for keeping the value of the default shell for programs to start.

If an explicit `<shell>` argument wasn't passed to `rbenv init`, it
tries to detect the shell by getting the name of its parent process. If
this fails, it falls back on the value of `$SHELL` as before.

Furthermore, `rbenv init` will set the RBENV_SHELL variable in the
current shell to the value of the detected shell so that `sh-shell` and
`sh-rehash` commands don't have to repeat the detection.

Have `rbenv prefix` handle the case where system Ruby is not installed,
i.e. `rbenv which ruby` doesn't find ruby in PATH.

Fixes #362